Sekitar jam 1 siang temenku menelpon dan menjelaskan permasalahan yang sedang dia hadapi pada kerusakan hp Sony Ericsson W300 dengan kerusakan Mic, Speaker dan Buzzer tidak berfungsi dan dia juga udah menjelaskan sangat detail sekali mulai dari Master Reset, penggantian Flexible, Plugin charge sampai akhirnnya dia mengganti IC dering baru juga udah dicoba, sampai-sampai dia mengorbankan hp dia sendiri yang masih hidup lalu ic deringnya dipindahkan ke hp yang bermasalah masih aja tidak berfungsi. Ya udah kalau gitu hpnya bawa kesini aja coba diflash dulu sapa tau memang programnya juga bermasalah kan g' ada salahnya dicoba tapi tetep kalau ada resiko kamu tanggung sendiri ya... masalahnya hp tersebut udah kamu utak-atik hardwarenya. Sekitar jam 7 malamnya dia berkunjung ketempatku dan dia memberikan hp W300nya dengan muka yang lumayan ngga' enak dilihatdeh pokoknya dan langsung pergi meninggalkan tempat kerjaku. Hp aku bongkar dan langsung masukan ke Ultrasonic Cleaner untuk membersihkan sisa-sisa flux yang ada pada board hp tersebut biar nanti tidak ada masalah saat melakukan prosses flashing.
Berikut langkah serta log proses repair menggunakan Cruiser Versi 13.21 :
1. Attach to Phone
2. Flash Main Firmware "W300i_CXC1123261_China_R9A036_Red49.cw3sw"
3. Flash Raw File System "W300i_CXC1123203_APAC_R9A036_Red49.cw3fs"
4. Turn off Phone
Log :
System diagnostics passed.
Version 13.21 ready!
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): W300i
CXC article: R9A031 prgCXC1123261_CHINA_JE
CXC version: R9A031
Language package: APAC
Operator: Generic Trade
CDA article: CDA102665/101
CDA version: R1A
Default article: cxc1123203
Default version: R9A036
Phonecode: 0000
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W300i_CXC1123261_China_R9A036_Red49.cw3sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:08:59
Flash process done.
[ --- Flash Raw File System --- ]
Flash file: "W300i_CXC1123203_APAC_R9A036_Red49.cw3fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:04:00
Flash process done.
[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Sampai disini nyalakan hp dengan memasukan kartu sim pada hp tersebut dan kalian bisa lihat disitu ada tulisan Configuration Error......
Dan Berikut ini proses finishingnya :
1. Attach to Phone
2. Unlock RSA >>> Phone automatically detached
3. Attach to Phone
4. Restore Firmware >>> FW RESTORAL HARUS SUDAH ADA PADA FOLDER SYSTEMNYA,
5. Customize File System >>> HINGGA MUNCUL PESAN : Certificates uploaded successfuly.
6. Turn off Phone
Log :
System diagnostics passed.
Version 13.21 ready!
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): W300i
CXC article: R9A036 prgCXC1123261_CHINA_JE
CXC version: R9A036
Language package: APAC
Phonecode: 0000
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): W300i
CXC article: R9A036 prgCXC1123261_CHINA_JE
CXC version: R9A036
Language package: APAC
Phonecode: 0000
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Identifying firmware...
Firmware ID: prgCXC1123261_CHINA_JE
Firmware version: R9A036
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060430 0501 CRUCXC1326743_COMPACTPR...
Searching for FW restoral file...
File name: R9A036_CXC1123261_CHINA_JE.cw3sw
FW restoral file found.
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
RSA protection was set back to normal.
Time: 00:00:07
Flash process done.
[ --- Customize File System --- ]
Sending CS applet...
The applet ignored baudrate change request!
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Initializing CS applet...
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102665/101
Done.
Writing CDA Version MS string...
New value: R4A
Done.
Writing Default Article MS string...
New value: cxc1123203
Done.
Writing Default Version MS string...
New value: R9A036
Done.
Writing langpack string...
New value: APAC
Done.
Writing country...
New value: Generic Trade
Done.
Uploading certificates...
Certificates uploaded successfuly.
[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Lalu aku coba nyalakan hp yang membikin pusing salah satu teman dan juga pelangganku itu, ternyata setelah aku melakukan tindakan flashing dengan cara diatas akhirnya masalah terselesaikan juga.
Selesai
Salam AyuNabila Team
Pelanggan : Fendik
Biaya : Rp. 35.000
HP sebelumnya pernah diservice adikku tapi aku ngga' tau dibawa kemana, menurut pengakuan pelanggan satu ini yang punya nama IMAM. Jadi terpaksa aku langsung minta ijin untuk membongkar HP tersebut dan langsung menunjukan ke dia kondisi mesin hpnya seperti apa. Karena ada bekas flux pada area Power IC jadi aku langsung bilang ke pelanggan ini kalau nantinya ada resiko jika kita melakukan proses repair. Mau di apain lagi mas kerjakan aja udah daripada seperti itu ya sama aja kan g' bisa dipakai.
Berikut langkah serta log proses repair menggunakan Cruiser Versi 13.21 :
1. Attach to Phone
2. Unlock RSA
3. Attach to Phone
4. Flash Raw File System "Z530i_CXC1250290_APAC_R6DA002_Red49.cz53fs"
5. Shutdown File System
6. Attach to Phone
7. Flash Main Firmware "Z530c_CXC1250455_China_R6DA001_Red49.cz53sw"
8. Unlock RSA
9. Attach to Phone
10. Flash Main Firmware ( Cuma kali ini yang kita masukan file GDFS dari Suplementary Files yang sudah terinstal sebelumnya Pada Software Cruiser). Kenapa saya melakukan repaire GDFS karena HP tersebut terdeteksi Phone Type sebelumnya terdeteksi K700.
11. Direct Unlock
12. Attach to Phone
13. Restore Firmware
14. Turn off Phone
Log :
System diagnostics passed.
Version 13.21 ready!
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): K700
CXC article: R6AC001 prgCXC1250454_GENERIC_MU
CXC version: R6AC001
Language package: APAC
Phonecode: 55555
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): K700
CXC article: R6AC001 prgCXC1250454_GENERIC_MU
CXC version: R6AC001
Language package: APAC
Phonecode: 55555
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Raw File System --- ]
Flash file: "Z530i_CXC1250290_APAC_R6DA002_Red49.cz53fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:03:13
Flash process done.
[ --- Shutdown File System --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): K700
CXC article: R6AC001 prgCXC1250454_GENERIC_MU
CXC version: R6AC001
Language package: APAC
Phonecode: 55555
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "Z530c_CXC1250455_China_R6DA001_Red49.cz53sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:08:52
Flash process done.
[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): K700
CXC article: R6AC001 prgCXC1250454_GENERIC_MU
CXC version: R6AC001
Language package: APAC
Phonecode: 55555
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "Z530i_FullGDFS_version1.cz53sw"
Waiting for flash file to load...
Preparing to program flash...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060430 0501 CRUCXC1326743_COMPACTPR...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:49
Flash process done.
[ --- Direct Unlock --- ]
Reading security zone...
Unlocking phone...
Recalculating CRCs...
Phonecode: 0000 (default)
Turning off phone...
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): Z530i
CXC article: R6AC001 prgCXC1250454_GENERIC_MU
CXC version: R6AC001
Language package: RUSSIA
Operator: Generic Trade
CDA article: CDA102462/63
CDA version: R3A
Default article: cxc1250290
Default version: R6AC001
Phonecode: 0000 (default)
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Identifying firmware...
Firmware ID: prgCXC1250455_CHINA_MU
Firmware version: R6DA001
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060430 0501 CRUCXC1326743_COMPACTPR...
Searching for FW restoral file...
File name: R6DA001_CXC1250455_CHINA_MU.cz53sw
FW restoral file found.
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
RSA protection was set back to normal.
Time: 00:00:07
Flash process done.
[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Setelah proses flashing selesai sekarang tinggal mengatasi Konfigurasi Errornya dengan cara sebagai berikut :
1. Attach to Phone
2. Unlock RSA >>> Phone automatically detached
3. Attach to Phone
4. Restore Firmware >> FW RESTORAL HARUS SUDAH ADA PADA FOLDER SYSTEMNYA,
5. Customize File System >>> HINGGA MUNCUL PESAN : Certificates uploaded successfuly.
6. Turn off Phone
Log :
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 17s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): Z530i
CXC article: R6DA001 prgCXC1250455_CHINA_MU
CXC version: R6DA001
Language package: APAC
Phonecode: 0000
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): Z530i
CXC article: R6DA001 prgCXC1250455_CHINA_MU
CXC version: R6DA001
Language package: APAC
Phonecode: 0000
Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Identifying firmware...
Firmware ID: prgCXC1250455_CHINA_MU
Firmware version: R6DA001
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060430 0501 CRUCXC1326743_COMPACTPR...
Searching for FW restoral file...
File name: R6DA001_CXC1250455_CHINA_MU.cz53sw
FW restoral file found.
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
RSA protection was set back to normal.
Time: 00:00:07
Flash process done.
[ --- Customize File System --- ]
Sending CS applet...
The applet ignored baudrate change request!
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Initializing CS applet...
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102462/37
Done.
Writing CDA Version MS string...
New value: R10A
Done.
Writing Default Article MS string...
New value: cxc1250290
Done.
Writing Default Version MS string...
New value: R6DA002
Done.
Writing langpack string...
New value: APAC
Done.
Writing country...
New value: Generic Trade
Done.
Uploading certificates...
Certificates uploaded successfuly.
[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Semoga bermanfat bagi saya sendiri terutama dan bagi orang lain jika kalian pernah mampir ke blog ini.
Terima Kasih
Salam AyuNabila Team
Pelanggan : Imam
Biaya : Rp. 50.000
Tiba- tiba blank Rick ...... ???
Sebelumnya kata yang punya gimana kok tiba2 blank? G' tau lah orangnya cuman bilang gitu aja ....
Ya udahlah coba aku hancurkan aja yah (just kidding) he he he ....
Berikut prosses repair HP K770 dengan Cruiser Versi. 13.21 :
Dengan File :
FW : "K770c_1202-3599_China_R8BC004_Red53.a1sw"
LP : "K770i_1201-7603_APAC_R8BC004_Red53.a1fs"
Custpacknya aku pilih APAC
System diagnostics passed.
Version 13.21 ready!
Do NOT connect the phone at this time!
[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via EROM...
Sony Ericsson phone detected.
Phone CID: 53
Phone color: Red
EROM version: R3A022
Trying CID53 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 070703 1229 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 53
Phone color: Red
Sending applet...
Applet ID: 071120 1355 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 080108 1810 ESGCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "K770c_1202-3599_China_R8BC004_Red53.a1sw"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:03:54
Flash process done.
[ --- Flash Raw File System --- ]
Flash file: "K770i_1201-7603_APAC_R8BC004_Red53.a1fs"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:27
Flash process done.
[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070904 1245 AN2CXC1250562_DB2020_CS...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/101
Done.
Writing CDA Version MS string...
New value: R1A
Done.
Writing Default Article MS string...
New value: 1201-7603
Done.
Writing Default Version MS string...
New value: R8BC004
Done.
Writing langpack string...
New value: APAC
Done.
Writing country...
New value: Generic Trade
Done.
[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
Nyalakan HP ternyata battrey tinggal dikit, cek Uji Layanan >*<<*<* semua ok baru mau charging battrey eh yang punya telpon. Gimana hpku? Baru Selesai Boz bisa diambil .....
semoga temen-temen blog yang mengalami masalah yang sama bisa memanfaatkan cara yang sama dengan cara yang saya pakai
Terima Kasih.
Salam Ayu Nabila Team
Pelanggan : Yoni
Biaya : Rp. 35.000
Untuk kali ini memang sengaja aku coba menggunakan Cruiser untuk menambahkan Paket Bahasa Indonesia pada hp W830i khususnya CID52 karena sudah ada pada support cruiser Language Pack untuk hp tersebut. Dan berikut ini log sukses dari penambahan paket bahasa tersebut :
System diagnostics passed.
Version 13.21 ready!
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID53 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 070703 1229 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 52
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W830c_CXC1250714_China_R1KG001_Red52.cw83fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:06:13
Flash process done.
[ --- Flash Raw File System --- ]
Flash file: "W830i_CXC1250714_APAC_R1KG001_Red52.a1fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:06:31
Flash process done.
[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/101
Done.
Writing CDA Version MS string...
New value: R10A
Done.
Writing Default Article MS string...
New value: cxc1250714
Done.
Writing Default Version MS string...
New value: R1KG001
Done.
Writing langpack string...
New value: APAC
Done.
Writing country...
New value: Generic Trade
Done.
